High-Quality Conventional Fire Alarm Systems Smoke Detectors

• Customization: Available
• Type: Smoke Sensor Probe
• Anti-theft Alarm System Approach: Active
• Model NO.: 836
• Anti-Theft Alarm System-Wide: Wire Alarm Detectors
• Types of Smoke Detectors: Photoelectric Smoke Style
• Infrared Sensor Installation: Ceiling
• Work Current: Less Than 2.5mA
• Standard Number Ref: En 57-7:2000
• Maximum Alarm Current: 15mA@24VDC
• Trademark: Scondaor
• Origin: China
• HS Code: 8531100000
• Production Capacity: 50, 000 Pieces/Month

Product Description

High-quality conventional fire alarm systems Smoke detectors

Advanced Features:
It is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.

The conventional rate of rise of rise heat detector uses thermal component to detect the temperature changing in the environment. It can enable fire alam when the temperature difference achieved the setting rate of rise temperature value reach the setting fixed ualue. It has a stable and reliable working performance.

Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.

The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel.

Main Features:

Power supply non-polar input
Infrared photoelectric sensor
MCU processing, eliminate false alarm
SMT manufacture technology, high stability
Dustproof, mothproof, anti-light interference design
Stainless steel shield, anti-RFI(20V/m-1GHz)
Execute criterion: GB4715, EN54-7

Product Description:

Operating Voltage Range:	9 to 28 VDC Volts Non-polarized
Standby Current:	≤120uA@24VDC
Maximum Alarm Current (LED on):	≤15mA@24VDC (1K Ohm current-limiting resistance)
Operating Humidity Range:	≤95%RH(40ºC±2ºC)RelativeHumidity,Non-condensing
Operating Temperature Range:	-10ºC to 50ºC(14ºF to 122ºF)
moke Alarm Sensitivity:	0.1-0.15dB/m
Height:	48.2mm installed in Base
Diameter:	99.45mm
Standard Number ref:	EN 54-7